Industrial Sandblasting & Vapor Blasting NJ | DJ's Painting
Commercial & Industrial      Nights & Weekends Available      In Business Since 1986 Commercial & Industrial     Since 1986
Industrial Surface Preparation

Industrial Sandblasting & Vapor Blasting For Tanks And Heavy Steel

Storage Tanks, Silos, Rail Cars And Plant Steel, Blasted To The Coating Spec By Our Own Crews.

  • South Jersey Contractor Since 1986
  • In Our Shop Or On Your Site
  • Blast And Coat Under One Contract
  • Vapor Blasting With 10% Of The Media

Request Your Site Assessment

Tell us what needs blasting. We'll look at it on site and put the scope in writing.

On-Site Look Written Scope No Obligation
Since 198640 years in business
4.8 / 203Google reviews
In-HouseOr on your site
24/7 CrewsNights & weekends
BBBAccredited business
What We Blast

Built For Big Steel, Not Small Parts

We take on industrial-scale surface prep. If it stores fuel, runs a plant, or rides the rails, we have the crews and the equipment for it.

Swipe to read more ➔

Storage & Containment Tanks

Fuel and oil storage tanks and containment tanks, stripped of rust and failed coatings and ready for a new system.

Silos & Vessels

Steel silos and process vessels on farms and in plants, prepped so the new coating bonds instead of just covering.

Railroad Cars

Rail cars and other heavy rolling stock, blasted down and recoated by the same crew.

Structural Steel & Piping

Beams, columns, stair towers, pipe racks, and piping in operating facilities, prepped without stopping the line.

Plant & Refinery Equipment

Machinery and equipment in manufacturing plants and refineries, brought back to clean metal before it is recoated.

Vapor Blasting

A damp aggregate still carried by air. Far less dust, about 10% of the sand, and a smooth, even profile that coatings grip.

Freshly painted white industrial oil storage tanks
Why Prep Decides Everything

A Coating Only Lasts As Long As The Blast Under It

When a tank coating blisters or a steel structure starts rusting through two years early, the paint is rarely the reason. The surface underneath was not cleaned down far enough or not given the profile the coating needs to grip.

That is why we own our blasting equipment and run it with our own crews. And because we are a coatings contractor too, the same company that blasts the steel is the one that coats it. No handoff between two trades, and no one to blame but us.

  • Profile set to the coating spec — matched to what the coating manufacturer calls for, not by eye.
  • Rust, scale, and failed coatings removed — down to a surface the new system can actually bond to.
  • Blasted and coated by one crew — the prepared surface goes straight into the coating schedule.
  • Our equipment, never subcontracted — the step that decides whether the coating lasts stays in-house.
Choosing A Method

Sandblasting Or Vapor Blasting? It Depends On The Job

We run both. Which one fits depends on what is on the surface, what is around it, and how much dust the site can tolerate.

Swipe to compare ➔

  Abrasive Sandblasting Vapor Blasting
How it works Compressed air drives dry abrasive at high velocity A damp aggregate, still carried by compressed air
Media Sand, garnet, glass beads, and similar abrasives Damp sand or aggregate
Airborne dust Heavy dust plume, needs full containment Dramatically less, lighter containment
Media used Full volume of dry abrasive About 10% of the sand or aggregate
Heat on the substrate Dry impact builds heat Damp media keeps it cooler, less risk of warping thin metal
Finish Sharper peaks in the profile Smoother, uniform profile with strong coating adhesion
Typically chosen for Heavy rust, scale, and thick coatings on tanks, silos, and structural steel Large commercial jobs near other trades or occupied areas, and heat-sensitive steel

Which method fits is decided on site, after we look at the surface and what surrounds it. We put the method and the reasoning in writing before you commit to anything.

Working Around You

Blasting Around Your Operation

The first question is never about price. It is whether a blasting crew is going to get in the way of the work. We plan the job so it does not.

Before anything is scheduled, we pick the method and sequence the work around your operation. You get the plan in writing, and you approve it before a crew shows up.

Get A Scope For Your Project Or call (856) 282-2263 and talk it through
  • Low-dust vapor blastingFar less airborne dust than dry blasting, so work can go on near other trades and occupied areas, with faster cleanup.
  • No wet sandblastingWe do not run water-carried blasting, the method that leaves a muddy mess behind.
  • Evenings, overnight, weekendsCrews available 24/7 when the schedule requires it, so the work happens outside your busy hours.
  • In our shop or on your siteTanks and steel structures are blasted where they stand.
  • A written plan firstMethod, sequence, and coating schedule agreed before we start.
How It Works

From Assessment To A Coated Surface

Four steps, and you know the method and the sequence before we start.

Swipe to read more ➔

1

Site Assessment

We look at the tank, steel, or equipment, the existing coating, the rust, and the access. On site, not over the phone.

2

Written Scope & Method

Blasting method, the coating system that follows, and the work sequence. In writing.

3

Blast & Coat

Our crews blast to the profile the coating calls for, then the prepared surface goes straight into coating.

4

Walkthrough & Handback

We walk the finished work with you, clean up the site, and hand it back ready for service.

Where We Work

Sites We Blast And Coat

Tanks are most of it. If it is big, steel, and has to last outside or under load, we have worked on one.

Swipe to see more ➔

Fuel Storage Tanks
Oil Containment Tanks
Refineries
Manufacturing Plants
Dairy Farms
Railroad Cars
Silos & Storage Facilities
Food & Beverage Processing
Steel Structures & Pipes

Areas We Serve

Working across ten states, with New Jersey as our home base.

Swipe to see every state ➔

New Jersey
Pennsylvania
Delaware
Maryland
New York
Connecticut
Rhode Island
Massachusetts
Virginia
Washington DC
Multi-site and national projectsOn projects above $30,000 we travel nationwide. If you have tanks or steel at several sites, that is work we are set up for.
Client Reviews

4.8 Stars Across 203 Google Reviews

Four decades of work out of Bridgeton, and the follow-through is what people write about.

Swipe to read more ➔

★★★★★

"Daniel and Reed were hard working and did excellent work. They showed up on time and completed the job in a timely manner. Also, they were very knowledgeable, kind and considerate. I am extremely pleased with the results and would highly recommend them. Thank you also, Teeghan. Pricing is very reasonable."

VP
Vicki PriceVerified Google Review
★★★★★

"5 Stars from service to the actual painting - DJ's professional staff are top-notch and their crew was wonderful. Very clean, they covered every square inch that wasn't being painted so it would be protected. They went above and beyond my expectations. Would recommend to everyone. Job well done!! Thank you!"

ST
Sean TomlinVerified Google Review
★★★★★

"Extremely pleased with the whole experience, from the date of the visit, quick turnaround of the proposal and start and completion of the work. Everything was done in a timely manner the only thing better than the experience was the finished product, thanks again to Lee, CJ and the rest of the crew."

AM
Andy MillerVerified Google Review
★★★★★

"Great experience from start to finish. True professionals and great work. They were very conscious of keeping things clean. I have used DJs for multiple project and always pleased with the results. Thanks Jose and team."

DC
David CramerVerified Google Review
★★★★★

"DJ’s painting is meticulous, professional and a joy to work with! I would be hard pressed to think of another painting contractor or any contractor for that matter that was a great to work with as these folks."

RT
Ron TortuVerified Google Review
★★★★★

"Fantastic guys! Great workmanship, polite, courteous and respectful! Have done over and above what we asked for, looks great! Will definitely call them back for our next job! Thanks Lee and Daniel!"

GR
Gary RobertsonVerified Google Review
Frequently Asked Questions

Answers Before You Ask For A Number

What we blast, which method fits, and how a project like this actually gets quoted.

Do you sandblast cars or small parts?
No. We are set up for industrial-scale work: storage tanks, silos, rail cars, structural steel, and plant equipment. For a car, a trailer, or a box of parts, a local blast shop will serve you better.
Sandblasting or vapor blasting: which do I need?
Dry abrasive blasting is usually the answer for heavy rust, scale, and thick coatings on tanks and structural steel. Vapor blasting uses a damp aggregate that is still carried by air: dramatically less dust, about 10% of the sand, a cooler process, and a smoother profile, so it suits large jobs near occupied areas. We do not do wet sandblasting, which carries the abrasive in water and leaves a muddy mess. We decide on site and explain why in writing.
Can you blast on site?
Yes. We blast in-house or on your site. Tanks, silos, and structural steel are done where they stand, with the work planned around whatever is operating nearby.
Do you coat the surface after blasting?
Yes. We are a painting and coatings contractor, so blasting and coating are one job under one contract. The prepared surface goes straight into the coating schedule instead of waiting on a second trade.
Can you work around our operation?
Yes. Our crews are available 24/7 when the schedule requires it, including evenings, overnight, and weekends. We sequence the work so the parts of the site you need stay in service.
How is a blasting project quoted?
On site. Surface area, the existing coating, how much rust there is, access, and the coating system that follows all move the number materially. A blasting quote given over the phone is a guess.
Let's Look At The Steel

Get A Blasting Scope, Not A Guess

We come out, look at the surface and what surrounds it, and put the method, the sequence, and the coating that follows in writing. No obligation, and no number invented over the phone.