Industrial Sandblasting & Vapor Blasting For Tanks And Heavy Steel
Storage Tanks, Silos, Rail Cars And Plant Steel, Blasted To The Coating Spec By Our Own Crews.
- South Jersey Contractor Since 1986
- In Our Shop Or On Your Site
- Blast And Coat Under One Contract
- Vapor Blasting With 10% Of The Media
Request Your Site Assessment
Tell us what needs blasting. We'll look at it on site and put the scope in writing.
Built For Big Steel, Not Small Parts
We take on industrial-scale surface prep. If it stores fuel, runs a plant, or rides the rails, we have the crews and the equipment for it.
Swipe to read more ➔
Storage & Containment Tanks
Fuel and oil storage tanks and containment tanks, stripped of rust and failed coatings and ready for a new system.
Silos & Vessels
Steel silos and process vessels on farms and in plants, prepped so the new coating bonds instead of just covering.
Railroad Cars
Rail cars and other heavy rolling stock, blasted down and recoated by the same crew.
Structural Steel & Piping
Beams, columns, stair towers, pipe racks, and piping in operating facilities, prepped without stopping the line.
Plant & Refinery Equipment
Machinery and equipment in manufacturing plants and refineries, brought back to clean metal before it is recoated.
Vapor Blasting
A damp aggregate still carried by air. Far less dust, about 10% of the sand, and a smooth, even profile that coatings grip.
A Coating Only Lasts As Long As The Blast Under It
When a tank coating blisters or a steel structure starts rusting through two years early, the paint is rarely the reason. The surface underneath was not cleaned down far enough or not given the profile the coating needs to grip.
That is why we own our blasting equipment and run it with our own crews. And because we are a coatings contractor too, the same company that blasts the steel is the one that coats it. No handoff between two trades, and no one to blame but us.
- Profile set to the coating spec β matched to what the coating manufacturer calls for, not by eye.
- Rust, scale, and failed coatings removed β down to a surface the new system can actually bond to.
- Blasted and coated by one crew β the prepared surface goes straight into the coating schedule.
- Our equipment, never subcontracted β the step that decides whether the coating lasts stays in-house.
Sandblasting Or Vapor Blasting? It Depends On The Job
We run both. Which one fits depends on what is on the surface, what is around it, and how much dust the site can tolerate.
Swipe to compare ➔
| Abrasive Sandblasting | Vapor Blasting | |
|---|---|---|
| How it works | Compressed air drives dry abrasive at high velocity | A damp aggregate, still carried by compressed air |
| Media | Sand, garnet, glass beads, and similar abrasives | Damp sand or aggregate |
| Airborne dust | Heavy dust plume, needs full containment | Dramatically less, lighter containment |
| Media used | Full volume of dry abrasive | About 10% of the sand or aggregate |
| Heat on the substrate | Dry impact builds heat | Damp media keeps it cooler, less risk of warping thin metal |
| Finish | Sharper peaks in the profile | Smoother, uniform profile with strong coating adhesion |
| Typically chosen for | Heavy rust, scale, and thick coatings on tanks, silos, and structural steel | Large commercial jobs near other trades or occupied areas, and heat-sensitive steel |
Which method fits is decided on site, after we look at the surface and what surrounds it. We put the method and the reasoning in writing before you commit to anything.
Blasting Around Your Operation
The first question is never about price. It is whether a blasting crew is going to get in the way of the work. We plan the job so it does not.
Before anything is scheduled, we pick the method and sequence the work around your operation. You get the plan in writing, and you approve it before a crew shows up.
-
Low-dust vapor blastingFar less airborne dust than dry blasting, so work can go on near other trades and occupied areas, with faster cleanup.
-
No wet sandblastingWe do not run water-carried blasting, the method that leaves a muddy mess behind.
-
Evenings, overnight, weekendsCrews available 24/7 when the schedule requires it, so the work happens outside your busy hours.
-
In our shop or on your siteTanks and steel structures are blasted where they stand.
-
A written plan firstMethod, sequence, and coating schedule agreed before we start.
From Assessment To A Coated Surface
Four steps, and you know the method and the sequence before we start.
Swipe to read more ➔
Site Assessment
We look at the tank, steel, or equipment, the existing coating, the rust, and the access. On site, not over the phone.
Written Scope & Method
Blasting method, the coating system that follows, and the work sequence. In writing.
Blast & Coat
Our crews blast to the profile the coating calls for, then the prepared surface goes straight into coating.
Walkthrough & Handback
We walk the finished work with you, clean up the site, and hand it back ready for service.
Before And After
Drag the slider to see the difference. A real DJ's Painting project.
Industrial Stair TowerCorroded steel treads and stringers, prepped and recoated
Have steel that needs the same treatment?
Call DJ's NowSites We Blast And Coat
Tanks are most of it. If it is big, steel, and has to last outside or under load, we have worked on one.
Swipe to see more ➔
Areas We Serve
Working across ten states, with New Jersey as our home base.
Swipe to see every state ➔
4.8 Stars Across 203 Google Reviews
Four decades of work out of Bridgeton, and the follow-through is what people write about.
Swipe to read more ➔
Answers Before You Ask For A Number
What we blast, which method fits, and how a project like this actually gets quoted.
Do you sandblast cars or small parts?
Sandblasting or vapor blasting: which do I need?
Can you blast on site?
Do you coat the surface after blasting?
Can you work around our operation?
How is a blasting project quoted?
Get A Blasting Scope, Not A Guess
We come out, look at the surface and what surrounds it, and put the method, the sequence, and the coating that follows in writing. No obligation, and no number invented over the phone.